Diamond wire sawing for heavy industry
Gold CoastSouthportCoomera wire sawing
Diamond wire sawing for the Gold Coast's high-rise, light rail and motorway structures. Sections too big for a wall saw, cut without the vibration.
Wire sawing on the Gold Coast
The Gold Coast builds up and it builds fast, and a lot of what is there now is being changed. Podium slabs, transfer beams and columns in towers being reconfigured. Light rail and M1 structures being widened or replaced. Marina and canal edge structures. These are heavily reinforced sections where a wall saw runs out of reach, and vibration is a problem for whoever is above, below or next door.
Diamond wire cuts by looping the section. The limit is wire storage, not power. Our flagship rig is a Hilti 30 kW twin motor electric wire saw, run off a minimum 80 kVA generator and rated for heavily reinforced concrete, masonry, stone and steel, wet or dry and partly submerged. The whole spread runs from our Brisbane base at Slacks Creek.
What we wire saw on the Gold Coast
- Podium and transfer slabs in tower refurbishments and change of use
- Columns and column capitals removed flush to the soffit
- Light rail, M1 and interchange structures
- Marina, seawall and canal edge structures, including partly submerged cuts
- Basement and carpark alterations where vibration is not acceptable
- Heavy foundations and machine bases in the northern industrial estates
Experience we bring to the Gold Coast
Our nearest wire sawing reference is Roma Street Station on Cross River Rail, where Perfect Group sectioned a 12 metre reinforced capping beam into 4 metre blocks for the CBGU Joint Venture, vibration-free, in a live station zone.
Gold Coast work is run from Slacks Creek. We have not wire sawed on the Coast yet and we say so. What we bring is the method, the rig and crews who have done the harder version of the job an hour up the road.
How we deliver it on the Gold Coast
We start with the structure, not the saw. Send us the drawings, or tell us what you have. We assess the section, the reinforcement, the access, the load path and what happens to the piece once it is cut. Then we give you a cut sequence, the temporary works it needs and a price for the whole method, not a rate per square metre.
Crews cover the Gold Coast from Coomera to Coolangatta and inland to the hinterland, from Slacks Creek. We do not quote a production rate until we have cut your material. Nobody publishes one for a 30 kW wire saw in reinforced concrete and we will not guess.
If it is a slab saw job, a few penetrations or general concrete cutting, that is Perfect Concrete Care and we will point you there. We do not do residential. DeconCut is for the big cut.
Wire sawing elsewhere
The same crews and the same rig, wherever the structure is.
Request a wire sawing assessment, Gold Coast
Tell us about the cut. We will tell you whether a wire saw is the right method, what it needs and what it will take. Drawings, photos or a rough description all work. Or call 1300 392 546.
DeconCut acknowledges the Aboriginal and Torres Strait Isander people as Traditional Custodians of the country on which we live and work. We pay our respects to the Traditional Custodians and Elders past, present and future, and honour their connection to the land and ongoing contribution to society.